Australia Wide Shipping

Flake Epoxy Flooring for Workshops

Workshop floor painted in epoxy by Sydney Epoxy Floors


Mechanical workshops require a flooring solution that is both hard-wearing and long lasting. Epoxy flake floors are the preferred chosen flooring solution for workshops due to their ability to withstand heavy wear and tear, resistance to chemicals and stains, and long-lasting durability.

Benefits of using flake epoxy flooring for workshops are

 Durability  Epoxy flake floors are extremely durable and can withstand heavy foot traffic, machinery, and equipment.

Chemical Resistance  Epoxy flake floors are resistant to a wide range of chemicals, including oil, grease and solvents, making them a great choice for industrial and manufacturing facilities.

Easy to Clean  Epoxy flake floors are non-porous and seamless, making them easy to clean and maintain. They can be swept, mopped, or even pressure washed without the risk of water damage or staining.

Customizable  Epoxy flake floors come in a variety of colors and patterns, allowing you to customize the look of your flooring to suit your specific needs and style preferences.

Slip resistance  Epoxy coatings can be designed with slip-resistant additives to improve safety in the workshop. This is especially important in areas where spills are common.

Overall, epoxy flake floors can be a great choice for workshops due to their durability, easy maintenance, and resistance to chemicals and stains. However, proper installation and maintenance are key to ensuring a long-lasting and safe flooring solution.

SIC Flake Epoxy Floor Layers by Sydney Industrial Coatings

Our tailor made packages and products are available to suit your project needs. For further information on preparation, application and colours available, scroll down beyond the products.

Showing 1–8 of 9 results

Steps to achieving a successful Seamless Flake Floor Epoxy Coating



  Step 1    Prepare the concrete thoroughly by diamond grinding with a course grit diamond

To achieve a successful floor coating system make sure your surface is free of dust, oil/grease, any loose particles or paint and moisture. Click on the options below for further information


Epoxy Flooring Tools Information

Epoxy Floor Coating Preparation


Floor Grinders: Floorex 480mm Grinder | Husqvarna 450mm Grinder | Scintex 250mm Grinder

Vacuums & Dust Extractors: Floorex | Husqvarna S36 (3 motor phase) | Husvarna S13 (single phase)

Diamond Grinding Plugs: Rectangle | Arrow | PCD (to remove previously coated or adhesives on the floor)

Redi-Lock Diamond Plugs: Sydney Industrial Coatings (9 pack)

Diamond Grinding Cup Wheels: 125mm to 250mm


  Step 2    Repair cracks and imperfections using two-pack epoxy fillers

Fill in all your cracks using a 2-pack epoxy filler and wait until the patching mortar is fully cured before grinding or coating the floor, this process usually takes a minimum of 6 – 8 hours.


For larger cracks and spalls: SIC Epoxy Coving & Repair Kit | Sika Sikadur 31 CFN

For smaller patching and cracks: Sika Sikadur 33 | Sikadur 513 (magic powder mixed into epoxy to thicken up)


  Step 3    Apply epoxy primer to the floor and allow the coating to cure

General curing time (at 20°C) is a minimum of 8 hours. This can vary further if solvent has been added to the epoxy.


Sika Australia: Sikafloor 160 (up to 40sqm) | Sikafloor 94 (recommended) | Sikafloor 158W (moisture barrier)

UltraKote: High Solids Epoxy

Elite Crete Systems: E100-VB5 Epoxy Vapor Barrier 

EpiMax: Epimax 237WB (water based)


  Step 4    Return within 24 hours of applying the primer to remove rubbish and imperfections (by grinding down high sections and patching any low sections)  

This is an important step for if the coating is left uneven, this will show though your final coat. If this step if not completed within 30 – 36 hours (depending on temperature) of applying the previous coat, the floor will need to be scratched using an 80 grit sand paper.


  Step 5    Apply an even coat of the coloured epoxy by rolling the product from wall to wall. Immediately after the floor has been completed, start the next step to broadcast the flakes  

We recommend always having a minimum of two people when completing an epoxy floor, this is to ensure the product does not begin to cure before you have finished broadcasting the flake. If there is no one to help, we would suggest applying in sections based on works time and pot life of product being used.


High Solids Epoxies: UltraKote High Solids Epoxy
100% Solids Epoxies:
Sikafloor 264 | Elite Crete Systems PT4 (pretinted)
UV Stable Polyurethanes: Sikafloor 359 AU | EpiMax 920
UV Stable Polyaspartic: EpiMax 842




  Step 6    Begin broadcasting the flakes immediately after the base coat has been applied then allow to cure 

We recommend broadcasting the flakes to the point of rejection, this means that you will keep apply the flake until the epoxy cannot have any more flake added to it. This is beneficial as a full epoxy flake system will hide imperfections for longer with its design. Wearing spike shoes to walk over the epoxy is essential with flake epoxy flooring, however you must apply safety practices and be cautious of injury.


Glitter Flakes


  Step 7    Return within 24 hours, vacuum the excess loose flakes and apply your top coat and allow to cure

For easier clean up you can use a blower to move the bulk of the flake to a corner and scoop up. Using thinners in the final (or finish) coat is not recommended.


Epoxies: Sika Sikafloor 169 | Elite Crete Systems VR1
Polyurethanes: Sikafloor 359 AU | UltraKote UVSeal | UltraKote SuperClear WB
Polyaspartic: EpiMax 920



  Step 8    Return within 24 hours and apply the final clear coat

If you are using a high body, self-levelling 100% solids epoxy, one squeegee coat will be enough. Using waterbased products, polyurathanes or polyaspartic products will require an additional coat. . Using thinners in the final (or finish) coat is not recommended. It is always recommended to back roll the product against the natural light to assist with achieving a more uniform finish.


Epoxy Glitter can be mixed into the final coat to create a stunning, eye-catching effect on the floor.

Antislip media can be added to the topcoat to achieve a higher slip rating.

Your floor will be trafficable after 24-48 hours and heavy items such as cars, boats or trailers shouldn’t be parked on the floor for 7 days after application of the final coat






SIC Mixed Flake Flooring Sample Card



SIC Natural Stone and Single Colour Epoxy Flake Flooring Sample Card From Sydney Industrial Coatings



Click here to view the PDF colour chart for the Base Coat of your Epoxy Flake Floor


Click here to view our Flake Epoxy Flooring PDF Brochure to see the samples and flakes


Google Rating
Based on 79 reviews