EpiMax 237WB Rapid Dry Low VOC Sealer Primer is a two-component water based penetrating epoxy sealer designed for rapid and efficient application to ground concrete. It is also ideal for prolonging the serviceability of partially-deteriorated or porous concrete. The system offers extremely low viscosity and is also suitable for providing a stable foundation layer for the application subsequent concrete protection systems. EpiMax 237WB can also be used to provide an economical dust suppressing layer to weak, dusting concrete floors.
Uses & advantages
- Specially formulated for concrete
- Excellent penetration
- Extremely low viscosity
- Apply by roller or spray
- Low surface tension
- Good work time
- Sealer for cut and seal concrete
- Anti-slip finish with EA2 Quartz
- Dust-proofing slabs
- Rapid sealing of car parks
- Rapid dry prime for FC sheet
- Workshop floors
- Shelf life: 12 months
- Full cure time: 7 days at 25ºC
- Work time: 30 minutes at 25ºC
- Application rate: 10-12 sq m/litre
- Mix ratio: 1 Activator : 2 Base
- Chemical Resistance: Good
Review the area in advance so that a fixed volume of mixed material can be applied over a fixed area to ensure correct application rate. Select a slow speed (400 rpm) mechanical mixer and ensure thorough mixing. When using EpiMax 237WB, combine EpiMax 237WB Activator with EpiMax 237WB Base and power mix well. EpiMax 237WB should be applied in a minimum of two coats by roller or airless spray.
EpiMax 237WB is available in 12 litre packs
Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.