Elite Crete Systems E100 Series VB5 Epoxy Vapor Barrier

E100-VB5™ is a high-solids, low-viscosity, three-component epoxy primer that eliminates outgassing and seals moisture vapor in concrete substrates. Designed to outperform standard solvent-based primers, it penetrates deep into concrete capillaries, filling surface pores for excellent adhesion and long-lasting moisture control.

TYPICAL USES

REFLECTOR™ Enhancer Flooring Systems: As the epoxy vapor barrier.
HERMETIC™ Neat Floor: As the epoxy vapor barrier.
HERMETIC™ Flake Floor: As the epoxy vapor barrier.
HERMETIC™ Color Quartz Floor: As the epoxy vapor barrier.
HERMETIC™ Stout Floor: As the epoxy vapor barrier.
HERMETIC™ Paramount Floor: As the epoxy vapor barrier.

KEY FEATURES

Slows hydration in new concrete, increasing strength
Eliminates outgassing bubbles in topcoats
Seals out moisture intrusion
Low to no odor and VOC-free
Air-releasing for smooth finishes
Suitable for priming green concrete surfaces (7 days depending on conditions)
Excellent impact and chemical resistance
Fast cure rate for quick project completion
Meets USDA, FDA, and CFIA standards
Protects against vapor transmission and rising damp

MIX RATIO

Mix 1 Part A and 1 Part B thoroughly for 2 minutes using a slow-speed drill and paddle.
Add 32 oz. / 1 L of potable water to each mixed gallon / 4 L. Ensure Part A and Part B are fully mixed before adding water.

LIMITATIONS

Not for exterior concrete surfaces.
Not intended as a wear coat.
Two coats may be necessary for highly porous substrates.
Subject to UV degradation with prolonged direct sunlight exposure.
Not recommended for surfaces with continuous water submersion.

COVERAGE

Concrete surface profile (CSP) of 3 (light shot blast): 250–300 sq. ft. / 23.2–27.8 sq. m per gallon / 4 L.

STORAGE

Store in a temperature-controlled area (65° F / 18° C to 85° F / 29° C).
Protect from freezing.
Shelf life: 1 year from the date of manufacture

Before applying , make sure to review the full product details, application instructions, and safety guidelines. Click below to download the datasheet and ensure optimal results.

Visit Elite Crete System’s Website.

Contact Sydney Industrial Coatings for any inquiries .

Reviews

There are no reviews yet.

Be the first to review “Elite Crete Systems E100 Series VB5 Epoxy Vapor Barrier – 2 Gallon”

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.

Elite Crete Systems E100 Series VB5 Epoxy Vapor Barrier – 2 Gallon