Australia Wide Shipping


Sikadur 31 CF Normal

(2 customer reviews)

$195.00 inc GST

Moisture Tolerant, Thixotropic, Structural 2-Component Adhesive


Sikadur®-31 CF Normal is a moisture tolerant, thixotropic, structural 2-component adhesive and repair mortar, based on a combination of epoxy resins and special fillers, designed for use at temperatures between +10 °C and +30 °C.

2 reviews for Sikadur 31 CF Normal

  1. John Wan

    This product works very well as a concrete repairer. We just applied it on our garage floor and were extremely satisfied.

  2. Craig Johnson

    The Sales staff were really welcoming and informative. They recommend I apply this product to patch my floor and it turned out to be marvelous. Thank you, guys.

Add a review

Your email address will not be published. Required fields are marked *

Sikadur®-31 CF Normal may only be used by experienced professionals.
As a structural adhesive and mortar for:

  • Concrete elements
  • Hard natural stone
  • Ceramics, fiber cement
  • Mortar, Bricks, Masonry
  • Steel, Iron, Aluminium
  • Wood
  • Polyester, Epoxy
  • Glass

As a repair mortar and adhesive:

  • Corners and edges
  • Holes and void filling
  • Vertical and overhead use

Joint filling and crack sealing:

  • Joint and crack arris / edge repair


  • Easy to mix and apply
  • Very good adhesion to most construction materials
  • High strength adhesive Thixotropic: non-sag in vertical and overhead applications
  • Hardens without shrinkage
  • Different coloured components (for mixing control)
  • No primer needed
  • High initial and ultimate mechanical strength
  • Good abrasion resistance
  • Impermeable to liquids and water vapour
  • Good chemical resistance

Concrete Grey

Proportioned 6kg kit
Part A 4kg
Part B 2kg

PDS  |  SDS Part A  |  SDS Part B

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.

You may also like…

Google Rating
Based on 79 reviews