Australia Wide Shipping

1717

Sikafloor 158 W Fast Barrier

$160.00$455.00 inc GST

Rapid Drying Hydrostatic Moisture and Incontinence Barrier

Clear
Quantity
SKU: BEB65A Categories: ,

Sikafloor 158 W Fast Barrier is a rapid-drying, 2-component, water based epoxy resin that chemically cures to form a permanent hydrostatic barrier.

Reviews

There are no reviews yet.

Be the first to review “Sikafloor 158 W Fast Barrier”

Your email address will not be published. Required fields are marked *

Applied in combination with suitable materials from Sikafloor®, SikaBond®, Sikadur®, SikaTite® & Davco® ranges.

  • To stop rising moisture in concrete on grade
  • To stop rising moisture on green concrete
  • To bind/consolidate a weakened or damaged concrete surface
  • To act as an incontinence barrier for concrete in Aged & Health Care facilities
  • Can be used under Sikafloor Epoxy Flooring System
  • Designed for use in conjunction with Sikabond® wood flooring adhesive

Advantages

  • Very Low VOC
  • Very Low Moisture Vapour Transmission                       1 coat = (3.7gm/m2/24hrs) as per ASTM E96
  • Water-based – User Friendly
  • Green Star Certified
  • Very low odour during application
  • Single application on most substrates
  • Solvent free
  • Non DG storage
  • Great penetration into porous construction materials
  • Easy mix ratio 2:1 A-B
  • Rapid drying 2-3hrs @ 23°C
  • Highly fluid and easy to apply
  • Resist up to 4 bar negative water pressure
  • Suitable for use with underfloor heating

Wet – White

Cured – Transparent (CLEAR)

2.8kg part A & 1.4kg part B = 4.2kg kit (3.9L)

12kg part A & 6kg part B = 18kg kit (16.66L)

PDS  |  SDS Part A  |  SDS Part B

https://aus.sika.com/en/construction/flooring/resin-flooring/epoxy-flooring-productssystems/epoxy-flooring-products/sikafloor-158-wfastbarrier.html

 

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.

You may also like…

Google Rating
5.0
Based on 80 reviews
×
js_loader