Australia Wide Shipping

NuPool-Chlorinate-Rubber-Pail-20ltNuPool-Chlorinate-Rubber-Pail-20lt

NuPool Chlorinated Rubber

$180.00$370.00 inc GST

Effortless pool perfection. NuPool’s chlorinated rubber delivers chlorine-resistant beauty & superior durability. Elevate your pool today.

Clear
Quantity
SKU: f8705c4ca79e Categories: , ,

NuTech NuPool Chlorinated Rubber


Get top-notch protection with NuPool Chlorinated Rubber – it comes in lots of colours! This special paint is made for rubber-coated pools, and it fights off oils, salts, fats, and grease. The unique thing about NuPool Chlorinated Rubber is you can pick the colour you like for your pool. It’s great for giving your pool a fresh look, and it’s just as strong as the regular 2-pack systems. Perfect for painting your pool and making it look awesome!

Key Features:

  • Water and Abrasion Resistance: Ensure long-lasting durability against water and wear.
  • Bacteria and Mould Protection: Guard your pool surfaces against harmful growth.
  • Chemical and Salt Resistance: Provide broad-spectrum protection against various elements.
  • Excellent Adhesion: Seamlessly bond to properly prepared chlorinated rubber coatings.

Application Guide:

Preparation:

  • Ensure surfaces are clean and in good condition.
  • Drain the pool, remove  water, and thoroughly dry the surface.
  • Eliminate oil, dirt, grease, flaking paint, and contamination.
  • Repair non-structural cracks and chips with a suitable filler.
  • For structural cracks, seek professional assistance.
  • Degrease using Nu-Eco Degreaser and high-pressure clean (min. 3000psi).
  • Etch the surface with Nu-EcoSafe Etch (Mix 1-part to 5 parts water) and high-pressure clean.
  • Allow the surface to thoroughly dry.

Application:

  • Brush/Roller 1st Coat: No thinning required. Observe recoat times.
  • Brush/Roller 2nd Coat: No thinning required. Observe dry time.
  • Spray (2 coats): Thin 10% – 15% with Thinner. Observe recoat and dry times.

Curing:

  • Drying times may vary in cooler conditions or high humidity.
  • Touch Dry: 20 minutes.
  • Recoat: 2 – 4 hours.
  • Full Cure: 7 Days.
  • Allow 7 days before filling the pool with water.

Note:

Do not apply NuPool Chlorinated Rubber to existing epoxy coatings. Verify existing coating composition before starting work.

 NuPool Care and Maintenance.

 NuPool Chlorinated Rubber ( TDS ).

 Safety Data Sheet ( SDS ).

Learn more about Sydney industrial coatings.

Warnings

***Please note: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.***

 

Reviews

There are no reviews yet.

Be the first to review “NuPool Chlorinated Rubber”

Your email address will not be published. Required fields are marked *

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.

Google Rating
5.0
Based on 79 reviews
×
js_loader