Australia Wide Shipping


EpiMax 777UHD Clear

$530.00$960.00 inc GST

Clear High Performance Seal Coat System in Gloss or Matt


EpiMax 777UHD High Performance Seal Coat System is a two component polyurethane coating that provides long-term protection to internal concrete. It is ideal as a scuff resistant clear protection system for ground concrete floors and is available as a standard hardening clear version in gloss and matt finishes.



  • Hazmat free/non flammable
  • Water based – low odour & food safe
  • Non yellowing behind glass
  • Gloss or matt
  • Application by roller or airless spray
  • Good adhesion
  • Excellent scuff resistance
  • Excellent abrasion resistance
  • Meets GBCA Low VOC standard
  • Meets AS 4586 Slip Resistance standard
  • Meets BCA CRF Fire standard
  • Good stain resistance
  • Excellent durability

Typical applications

  • Retail service areas
  • Shopping malls
  • Restaurant seating areas
  • Television studios
  • Correctional facilities
  • Hotels & convention centres
  • Showrooms
  • Photo-decorative sealer
  • Decorative cement micro topping sealer


Typical properties

  • Shelf life: 12 months
  • Mix ratio: 1 volume Activator : 4 volumes Base
  • Work time: 2 – 3 hours at 25ºC
  • Full cure: 7 days • Recoat: 16 – 24 hours standard
  • Volume solids content: 40 – 65% (varies with water addition)
  • Typical application rate: 10 m2/L


Estimating data
9 ltr EpiMax 777UHD Clear Seal Coat System = 90 m2/coat
18 ltr EpiMax 777UHD Clear Seal Coat System = 180 m2/coat




There are no reviews yet.

Be the first to review “EpiMax 777UHD Clear”

Your email address will not be published. Required fields are marked *

Information Guide  |  Application Guide  |  SDS

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.

Google Rating
Based on 79 reviews