Australia Wide Shipping


(1 customer review)

$300.00 inc GST

Two Pack, 100% Solids, Premium Grade Vehicle and Pedestrian Trafficable Moisture and Hydrostatic Pressure Barrier, Suitable for Application Over Wet and Damp Surfaces.


ULTRABARRIER is a two component, 100% Solids, slow cure, Food grade epoxy coating system with good chemical resistance and protection against rising dampness and negative pressure in the concrete.



  • Approved for use in contact with food and portable water
  • Excellent Bond to damp concrete and good adhesion to old concrete
  • Moisture tolerant during cure and blooming
  • Low temperature curing property (can cure in temperatures of 3+ degrees)
  • Vehicle trafficable, resists hot tyre pick up and has excellent mechanical properties
  • Can be applied over a 3 days old concrete as a green concrete primer prior to applying epoxy floor coating products
  • Curing time can be reduced to 2 hours when used in conjunction with ULTRAKOTE Epoxy Accelerator
  • Exhibits good flexibility and Crack-bridging ability when applied at 500 Microns DFT
  • solvent-free and non-shrinking product



  • Residential garages can be used as primer & base coat for flake flooring systems
  • Driveways
  • Primer under the timber flooring
  • Warehouses
  • Workshops
  • Commercial kitchen floors
  • Industrial environments such as; meat processing plants, cheese and dairy facilities, breweries, Wineries, distilleries, food packaging plants and more

Manufactured by


1 review for Ultrakote ULTRABARRIER 10L

  1. Adrian Abraham

    We have applied two roller coats of this product to our damp floor, and it has sealed the dampness completely and done a great job!

Add a review

Your email address will not be published. Required fields are marked *

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.

Google Rating
Based on 73 reviews