Soudal All Purpose Silicone is a high-quality, flexible, neutral cure silicone suitable for a wide range of sealing, waterproofing, and bonding applications where protection against mould and mildew is required. This product is the ultimate all-rounder silicone and is suitable for the broadest range of applications.
It offers strong adhesion to ceramics, glass, aluminium (including powder-coated and anodised), PVC, stainless steel, zinc and galvanised coated surfaces, timber, concrete, fibreglass, laminate, painted surfaces, and more. For best performance, clean non-porous surfaces with Soudal Cleaner & Degreaser before application.
FEATURES & BENEFITS
– Quality neutral cure
– Roof & gutter
– Kitchen & bathroom
– Glass & glazing
– Mould resistant
– Water potable
– Food safe (clear and white colour)
APPLICATIONS
A high-quality, flexible, neutral cure silicone suitable for a wide range of applications, including:
Bathrooms & Kitchens: For sealing baths, sinks, toilets, showers, tiles, plumbing fixtures, glass, tiles, etc.
Roofs & Gutters: For sealing and guttering, flashings, cladding, roofing, down pipes, ducting, lap joints, sheet metal, etc. Available in matching Colorbond metal colours.
Windows & Glazing: For sealing around windows, display cabinets, frames, and architraves, etc.
PACKAGING
Colour options: Beige, Grey, Alu Grey, Ivory, Black, Brilliant White, Transparent, Dark Grey, Stone, Pewter, Charcoal, Alabaster, Titania, Taupe
Packaging: 300 ml cartridge
Shelf life: 15 months in unopened packaging in a cool and dry storage place at temperatures between +5°C and +25°C.
NOTE
– Do not use on natural stones like marble, granite, etc. (staining). Use Soudal Silirub MA or Silirub+ S8800 for this application.
– Direct contact with the secondary sealing of insulating glass units (insulation) and the PVB-film of safety glass must be avoided.
– A total absence of UV can cause a colour change of the sealant.
– In an acid environment or in a dark room, a white sealant can slightly turn yellow. Under the influence of sunlight, it will return to its initial colour.
– When finished with a finishing solution or soapy solution, make sure that the surfaces are not touched by this solution. This will cause the sealant not to adhere to that surface. Therefore, we recommend only dipping the finishing tool in this solution.
– We strongly recommend not to apply the Finishing Solution in full sunlight as it will dry very fast in these circumstances.
– Do not use on polycarbonate. Use Silirub PC instead.
– Do not use in applications where continuous water immersion is possible.
– When using different reactive joint sealants, the first joint sealant must be completely hardened before the next one is applied.
Refer to the datasheet below for more information. Contact us for Pallet buy Pricing.
Reviews
There are no reviews yet.