Australia Wide Shipping

Sale!

Chlorinated Rubber (Colour)

$180.00$370.00 inc GST

NuPool Chlorinated Rubber offers a unique single-pack solution with performance comparable to traditional 2-pack systems, providing unmatched durability against oils and salts for a hassle-free and lasting pool transformation.

Clear
Quantity
SKU: 2a6282f341b0 Categories: , ,

NuTech NuPool Chlorinated Rubber


NuPool Chlorinated Rubber: Superior Protection for Pool Surfaces

Introducing NuPool Chlorinated Rubber, a single-pack solvent-based system offering excellent resistance to oils, salts, fats, and grease. Specifically designed for chlorinated rubber coated surfaces, it provides performance akin to traditional 2-pack systems, making it an ideal choice for pool repainting.

Key Features:

  • Water and Abrasion Resistance: Ensures durability against water and wear.
  • Bacteria and Mould Protection: Guards against harmful growth.
  • Chemical and Salt Resistance: Offers broad-spectrum protection.
  • Excellent Adhesion: Bonds seamlessly to properly prepared chlorinated rubber coatings.

Application Guide:

Preparation:

  1. Ensure surfaces are clean and in good condition.
  2. Drain the pool, remove residual water, and thoroughly dry the surface.
  3. Eliminate oil, dirt, grease, flaking paint, and contamination.
  4. Repair non-structural cracks and chips with a suitable filler.
  5. For structural cracks, seek professional assistance.
  6. Degrease using Nu-Eco Degreaser and high-pressure clean (min. 3000psi).
  7. Etch the surface with Nu-EcoSafe Etch (Mix 1-part to 5 parts water) and high-pressure clean.
  8. Allow the surface to thoroughly dry.

Application:

  • Brush/Roller 1st Coat: No thinning required. Observe recoat times.
  • Brush/Roller 2nd Coat: No thinning required. Observe dry time.
  • Spray (2 coats): Thin 10% – 15% with Thinner. Observe recoat and dry times.

Curing:

  • Drying times may vary in cooler conditions or high humidity.
  • Touch Dry: 20 minutes.
  • Recoat: 2 – 4 hours.
  • Full Cure: 7 Days.
  • Allow 7 days before filling the pool with water.

Note: Do not apply NuPool Chlorinated Rubber to existing epoxy coatings. Verify existing coating composition before starting work.

Elevate your pool with NuPool Chlorinated Rubber – where protection meets simplicity for lasting pool perfection.

 NuPool Care and Maintenance.

 NuPool Technical Data Sheet ( TDS ).

 Safety Data Sheet ( SDS ).

Learn more about Sydney industrial coatings.

Warnings

***Please note: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.***

 

Reviews

There are no reviews yet.

Be the first to review “Chlorinated Rubber (Colour)”

Your email address will not be published. Required fields are marked *

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.

Google Rating
5.0
Based on 77 reviews
×
js_loader