Sure Seal Consolidator Sealer is a premium combination of consolidator and water repellent for the treatment of porous masonry surfaces. It is a high performance water-based, deep penetrating sealer that strengthens, stabilizes and consolidates loose and friable surfaces. It provides unparalleled protection against water, moss, efflorescence and alkalis to maintain the natural look and beauty of stone surfaces. It is invisible upon application, and will not change the appearance of the treated surface.
Sure Seal Consolidator Sealer is specially designed to naturally stabilize and strengthen crumbling stone, seal and strengthen stone pool coping, sandstone, and other soft or damaged natural stone surfaces. It works by penetrating beneath the stone surface. When used properly, it can stop stone erosion and halt further damage.
Sure Seal Consolidator Sealer is premium consolidator / densifier, hardener and water repellent sealer for new and existing substrates which penetrates deeply into new and deteriorated masonry surfaces. May be used on most surfaces including sandstone, limestone, stucco, brick and terracotta.
BENEFITS & CHARACTERISTICS:
- Water based
- Easy To Apply
- Resistant Against Alkaline
- Strengthens the Structure of Natural Stone
- Helps Prevent Salt Water Corrosion
- Ideal Around Swimming Pools
- Consolidation of Loose and Friable Surfaces
- Helps Prevent Rising Damp in Brickwork & Sandstone
- Suitable for the Restoration of Natural Stone
- Deep Penetration and Fast Curing
- Inhibits Efflorescence and Freeze Thaw
- Highly Water Resistant once Cured
- Allows the treated surface to breathe
- Interior And Exterior Use
- Preserves Natural Look
PACKAGING:
Available in:
- 1 Litre (also available in cartons of 12 x 1L)
- 4 Litre (also available in cartons of 4 x 4L)
- 20 Litre drums
Please reach out to us if you are after carton.
APPLICATION INSTRUCTIONS:
- Use as is – do not dilute.
- Clean off any dust, dirt, grease & oil etc.
- Surfaces should be dry and clean to enable deep penetration.
- Temperature of the substrate during application should be between +5° to 35°C
- Substrates should be fully cured before sealing.
- Protect surrounding areas such as glass, timber, metal and plastic and plants.
- Ensure the area to be treated is well ventilated.
- Test in a small inconspicuous area to determine suitability and compatibility.
- Apply by dipping the substrate into the Consolidator Sealer OR by using a brush or low pressure sprayer.
- Application of 2 good coats is recommended.
- After application, protect the substrate against rain for at least 5 hours.
Contact us today for information on bulk purchases and trade pricing. Free shipping insurance is included with your order.
Download Technical Datasheet.
Reviews
There are no reviews yet.