Chemical anchor CA1400 is a two-component anchoring resin for the pressure-free securing of anchoring rods, studs, reinforcing bars, threaded collars, profiles etc… in various solid and hollow materials, such as concrete, cracked concrete, solid brick, hollow brick, porous concrete, natural stone, plasterboard walls, etc..

Characteristics

Easy to use and to apply
Can be applied with standard caulking gun
Fast cure
Styrene free (low odour)
Can be used in wet drill holes
Wide application area
Cartridge reusable by simply exchanging static mixer
Watertight and impermeable fixing

Applications

Suitable for various solid and hollow materials, such as concrete, cracked concrete, solid brick, hollow brink, porous concrete, natural stone, plasterboard walls, etc.

Packaging

Colour: medium grey after mixing
Cartridge: 280 ml and 165 ml for use with standard caulking gun

Shelf Life

18 months for 280 ml cartridge and 12 months for 165 ml cartridge, in original packaging stored at cool and dry place at temperatures between +5°C en +25°C.

Instructions for Use

Drill hole at recommended depth
Clean drill hole with brush and air pump thoroughly
Screw static mixer onto cartridge
Dispense the first 10 cm of the product to waste (on piece of cardboard) until an even colour (medium grey) is achieved, and the product is well mixed
Solid stone: fill the drill hole from the bottom up. Hollow brick: insert sleeve and fill it bottom up, so that the resin is pressed through the tiny holes of the sleeve
Insert anchoring rod with twisting left-right motion
Inspect the drill hole for adequate filling
Observe hardening time. Don’t move the anchoring rod during curing
Leave the excess of product to cure as well. Remove it mechanically with hammer and chisel once cured
Install component, applying the right torque

Note: There is a risk of staining on porous substrates such as natural stone. On such substrates a preliminary compatibility test is recommended.

We offer free shipping insurance, excellent trade prices and nationwide delivery. Refer to the datasheet for more information. Contact us for Pallet buy Pricing.

Reviews

There are no reviews yet.

Be the first to review “Soudal Soudafix CA 1400 Chemical Anchor – Grey”

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.