Sikagard®-62 is a two part, rigid, 100 % solids, coloured high build epoxy resin based protective coating with high resistance to abrasion and chemical attack.
Australia Wide Shipping
Australia Wide Shipping
$450.00 – $495.00 inc GST
2-part epoxy protective coating / lining system
Sikagard®-62 is a two part, rigid, 100 % solids, coloured high build epoxy resin based protective coating with high resistance to abrasion and chemical attack.
USES
CHARACTERISTICS AND ADVANTAGES
Sikagard 62 system is available in a range of standard RAL colours
Signal White RAL 9003 | Window Grey RAL 7040 | Light Grey RAL 7035 | Oxide Red RAL 3009 | Stone Grey RAL 7030 | Dusty Grey RAL 7037 | Dahlia Yellow RAL 1033 | Koala Grey N45 | Traffic Black RAL 9017
Non standard colours can be supplied on request
Grey White RAL 9002 | Reed Green RAL 6013 | Slate Grey RAL 7015 | Anthacite Grey RAL 7016 | Grey Beige 1019 | Red Orange RAL 2001 | Pastel Blue RAL 5024 | Signal Blue RAL 5005 | Beige RAL 1001 | Ruby Red RAL 3003 | Pebble Grey RAL 7032 | Sky Blue RAL 5015 | Grass Green RAL 6001
Part A = 8.4 kg
Part B = 3.0 kg
Sikafloor Pigment x 1 = 1.15kg
Total kit 12.55kg – 9.2 L = Total kit 12.55kg – 9.2 L
Consumption
~0.25 – 0.35 L m² per layer depending on system structure requirements
Mixing Ratio
Part A : Part B = 3 : 1 by weight 2.1 : 1 by volume
Pot Life
| Temperature | Time |
|---|---|
| +10 °C | ~30 min |
| +20 °C | ~20 min |
| +30 °C | ~10 min |
Waiting time to overcoat
| Temperature | Min. | Max. | Full Cure |
|---|---|---|---|
| +10 °C | ~ 30 hours | ~ 3 days | ~ 14 days |
| +20 °C | ~ 10 hours | ~ 2 days | ~ 10days |
| +30 °C | ~ 6 hours | ~ 1 day | ~ 5 days |
https://aus.sika.com/en/construction/flooring/protective-coatingsandlinings/sikagard-62.html#documents
Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.
Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.
Reviews
There are no reviews yet.