Australia Wide Shipping

Screenshot 2023-01-10 215415Screenshot 2023-01-10 215415

Sikagard 552W – 15ltr Aqua Primer

$350.00 inc GST

Water based primer for coating


SKU: 2BF57F Categories: ,

Sikagard®-552 W Aquaprimer is a one-component water dispersed adhesion promoting primer for water dispersed polymer paint coatings. Sikagard®-552 W Aquaprimer is part of a system that complies with the requirements of EN 1504-2 as a protective coating.


There are no reviews yet.

Be the first to review “Sikagard 552W – 15ltr Aqua Primer”

Your email address will not be published. Required fields are marked *


Priming coat for concrete and dense mineral substrates like fibre cement, aerated concrete, gypsum and thin rendering such as Sika® MonoTop®-723 N, Monotop FC, etc. Sikagard®-552 W Aquaprimer can also be used as a primer on firmly adhering existing water based coatings or under cement resurfacing mortar to improve the adhesion in case of concrete surface treated with hydrophobic impregnation. Sikagard®-552 W Aquaprimer is part of a system:

  • Suitable for protection against ingress (Principle 1, method 1.3 of EN 1504-9),
  • Suitable for moisture control (Principle 2, method 2.3 of EN 1504-9)
  • Suitable for increasing the resistivity (Principle 8, method 8.3 of EN 1504-9)



  • Water dispersed – solvent-free
  • Environmentally friendly
  • Water vapour permeable
  • Can be used as an adhesion promoter for coating or cement based resurfacing mortar

Milky white liquid

15 litre pail


Sikagard®-552 W Aquaprimer is supplied ready for use; do not dilute it. Shake it thoroughly prior to apply it.

Sikagard®-552 W Aquaprimer can be applied by brush, roller or airless spray.


Clean all tools and application equipment with clean water immediately after use. Hardened / cured material can only be removed mechanically.

Safety Data Sheet (SDS) | Product Data Sheet (PDS)

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.

Google Rating
Based on 80 reviews