Australia Wide Shipping

Screenshot 2022-11-11 143757Screenshot 2022-11-11 143757

Sikafloor Level Pro Finish – 9kg

$85.00 inc GST

SELF-PRIMING FINISHING & SMOOTHING CEMENT

Quantity:
SKU: A5E109 Categories: ,
Sikafloor® Level PRO Finish is a fast-drying self-priming skim coat that provides a smooth flat surface when dry.

Reviews

There are no reviews yet.

Be the first to review “Sikafloor Level Pro Finish – 9kg”

Your email address will not be published. Required fields are marked *

USES

  • Applied in combination with suitable materials from Sikafloor®, SikaBond®, Sikadur®, SikaTite® & Davco® ranges
  • Installed as a skim coat over internal concrete substrates, masonite underlay or CFC sheeting prior to subsequent fooring materials
  • Can be used on walls and floors to smooth roughened/damaged concrete

CHARACTERISTICS AND ADVANTAGES

  • Very low VOC
  • Green star certified
  • High moisture tolerance
  • Suitable for castor wheels loadings
  • Non-combustible
  • Fast drying
  • Self-priming on smooth trowel finish concrete
  • Applied from feather edge up to 4mm

 

Grey Powder

9kg (3x3kg) Pail –  64 per pallet

Mixing ratio

1.4 – 1.5 Litres of clean, cool water per 3kg of powder.

Layer thickness

0 – 4mm

Ambient air temperature

  • Minimum 10°C
  • Maximum 35°C

Pot Life

10 – 15 Minutes @ 23°C

Do not mix more product than can be applied within 15 minutes.

Waiting time to overcoating

Flooring can be installed only when surface is dry and can be worked on without damage (usually 20 – 30 minutes @ 23°C).

 FS SDSSDSPDS

https://aus.sika.com/en/construction/flooring/cement-levellingsystems/sikafloor-level-profinish.html

Colour accuracy disclaimer: We have taken care to display the most accurate visuals of our products. However, we are not responsible for the colour accuracy of the device you are viewing our swatches on. These variations arise due to different computer monitors and devices (make, model and technology, as well as resolution, contrast and brightness control settings) in much the same way a scan will differ from an original image and a colour photocopy. Furthermore, coatings can exhibit variation in perceived colour depending on gloss level and application method. If you require a very specific colour match, please make your selection via actual swatches and colour boards available at our showroom.

Product Disclaimer: Ensure you read all product, technical and safety data sheets prior to application as liability falls on the applicator. All products must be applied in accordance with manufacturer’s recommended method.

Google Rating
5.0
Based on 90 reviews
×
js_loader