Nutech Metal Primer is a water-based, corrosion-resistant acrylic primer designed for superior adhesion and protection on a range of metal surfaces. It’s ideal for use with Flexishield and NXT top coats to create a high-performance, weatherproof finish.
Metal Primer is a water-based acrylic primer and can be applied to a range of metal surfaces such as:
- New and old galvanised metal
- Pre-coated zinc steel sheeting
- Coated metal sheet roofing
- Facade cladding
- Fencing
Features & Benefits:
- Improved hardness and flexibility
- Excellent long-term resistance to corrosion and rust
- Easy application and clean up
- Suitable for new and weathered galvanised and zinc metal sheeting
- Weatherproof
- Excellent adhesion to a wide range of metal substrates
- Outstanding durability
Important Notes
- SUBSTRATE surface temperature must not be below 10°C and not exceed 50°C
- ADHESION may be affected when applied to cold or hot metal surfaces
- ENSURE no surface moisture is present prior to application
- CONSIDERATION must be given to other climatic conditions such as wind and relative humidity
- DO NOT apply topcoat until the primer is completely dry
- DO NOT apply Metal Primer in very cold conditions
- DO NOT Apply to extremely hot surfaces
- Failure to observe these provisions may affect coating adhesion
Appearance
Light grey viscous liquid
Coverage
6m²/L (per coat). Note: To maximise performance do not over spread.
Coats Required
1 Coat
Recommended Top Coat
Metal Primer is a suitable undercoat / primer for NXT Cool Zone, NuFlex, Tileflex, Flexi-Shield Low Sheen and Flexi-Shield Matt. Refer to the relevant Nutech TDS for top coat application recommendations.
Reviews
There are no reviews yet.